DIN 966 Cross-Recessed Raised Countersunk Head Machine Screw
Raised countersunk (oval) head, Phillips / Pozidriv cross-recessed metric screws used in sheet metal, covers and hardware assemblies where a wide bearing surface and a more decorative appearance are required.
Catalogue – Page Image (toggle)
| Thread Size (d) | M4 | M5 | M6 | M8 | M10 | |||||
| Pitch | p | 0,70 | 0,80 | 1,00 | 1,25 | 1,50 | ||||
| Head Height | kmax. | 2,20 | 2,50 | 3,00 | 4,00 | 5,00 | ||||
| f | 1,00 | 1,25 | 1,50 | 2,00 | 2,50 | |||||
| Head Diameter | dkmax. | 7,50 | 9,20 | 11,00 | 14,50 | 18,00 | ||||
| dkmin. | 7,14 | 8,84 | 10,57 | 14,07 | 17,57 | |||||
| Radius | r | 1 | 1,3 | 1,6 | 2 | 2,5 | ||||
| Angle | 90° | |||||||||
| Recess Width | m | 4,50 | 5,30 | 6,80 | 9,00 | 10,00 | ||||
| Recess Depth | Qmax. | 2,54 | 3,27 | 3,53 | 4,68 | 5,88 | ||||
| Qmin. | 2,04 | 2,77 | 3,03 | 4,18 | 5,38 | |||||
| Thread Size (d) | M4 | M5 | M6 | M8 | M10 | M12 | ||
| Length (L) | Mass for 1,000 units (kg) | |||||||
| 10 | 1,21 | 1,98 | 2,66 | 6,14 | – | – | ||
| 12 | 1,37 | 2,23 | 3,01 | 6,78 | 11,70 | – | ||
| 16 | 1,68 | 2,72 | 3,36 | 8,05 | 13,70 | 20,55 | ||
| 20 | 1,99 | 3,22 | 4,07 | 9,32 | 15,70 | 23,60 | ||
| 25 | 2,37 | 3,83 | 4,78 | 10,90 | 18,20 | 27,30 | ||
| 30 | 2,76 | 4,44 | 5,66 | 12,50 | 20,70 | 31,05 | ||
| 35 | 3,15 | 4,93 | 6,55 | 14,10 | 23,70 | 35,60 | ||
| 40 | 3,53 | 5,68 | 7,43 | 15,70 | 25,70 | 38,60 | ||
| 45 | 3,91 | 6,30 | 8,31 | 17,30 | 28,20 | 42,30 | ||
| 50 | 4,30 | 6,93 | 9,20 | 18,90 | 30,70 | 46,05 | ||
| 55 | 4,67 | 7,56 | 10,10 | 20,50 | 33,20 | 49,80 | ||
| 60 | 5,05 | 8,19 | 10,91 | 22,10 | 35,80 | 53,70 | ||
| 70 | 5,82 | 9,41 | 12,70 | 25,30 | 41,10 | 61,60 | ||
| 80 | 6,57 | 10,60 | 14,52 | 28,50 | 46,25 | 69,40 | ||